Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspace

Dino-Lite AG5715MZT EDGE Global Shutter 2 MP: Why Rolling-Shutter CMOS Smears Moving Objects and How Simultaneous Pixel Exposure + External Trigger Enables Microscopy of Spinning Motor Shafts

Published July 15, 2026 at 11:48 AM

Image sensor technology is divided into two main categories based on HOW the pixels are read out: ROLLING SHUTTER (the majority of modern CMOS sensors) and GLOBAL SHUTTER (specialized sensors for specific applications). The difference is invisible in still photography, but dramatic when capturing dynamic scenes.

Rolling shutter — how standard CMOS works

A rolling shutter CMOS reads out the pixels ROW BY ROW, from the top to the bottom of the sensor. Specifically for a 1920×1080 sensor:

  1. Row 1 (top): pixels are exposed and read out at t = 0.
  2. Row 2: exposed and read out at t = 15 μs.
  3. Row 3: exposed and read out at t = 30 μs.
  4. …
  5. Row 1080 (bottom): exposed and read out at t = 16.2 ms.

Total readout time: 16–33 ms for the entire image (corresponding to 30–60 fps).

This works excellently for STILL objects — 16 ms is imperceptible when the object is stationary. The image is sharp and distortion-free.

Rolling shutter distortion with moving objects

HOWEVER, when the object moves DURING the 16 ms it takes to read out the full image, the following occurs:

  • Skew: Vertical lines on a horizontally moving object appear SKEWED. The faster the movement, the more pronounced the tilt.
  • Rotational distortion (rolling shutter wobble): Rotating objects appear SPIRAL-shaped rather than circular.
  • Partial exposure / stretching: An object passing across the field of view from left to right appears as a STRETCHED or COMPRESSED version of its actual shape.

In microscopy, this is a SIGNIFICANT problem when:

  • Examining spinning components (motor shafts, propellers, drill bits in operation).
  • Production line QC on a running line (packages, components passing under the microscope).
  • Analyzing moving fluid flows (ink jets, nozzle spray patterns).
  • Sports and physiological research (microscopic movements in cell cultures).

Global shutter — simultaneous pixel exposure

Global shutter utilizes an entirely different readout architecture. All pixels are exposed and read out SIMULTANEOUSLY at the exact same point in time.

Physically, this is implemented using two-stage electronics within each pixel:

  1. Stage 1 (exposure): All pixels collect light simultaneously for a programmed duration (typically 100 μs – 40 ms).
  2. Stage 2 (storage): All pixels transfer their accumulated charges to an INTERNAL STORAGE CAPACITOR simultaneously. This stops the exposure at the exact same moment across the entire sensor.
  3. Stage 3 (readout): The charges in the storage capacitors are read out row by row — but because the exposure is already completed, the readout time has no impact on image integrity.

The result: no temporal distortion. Vertical lines remain vertical. Rotational movement is captured as circular. Fast-moving objects are captured in their true shape at ONE specific instant.

The cost of global shutter

Global shutter requires every pixel to have a built-in storage capacitor and control circuitry. This increases the complexity of the pixel architecture and reduces the light-gathering area per pixel.

Practical implications:

  • A global shutter sensor is typically 20–40% more expensive per pixel than a rolling shutter sensor.
  • Light sensitivity is typically 20–30% lower (smaller light-gathering area).
  • Image noise in low-light conditions is typically higher.

For APPLICATIONS REQUIRING FROZEN MOTION, these trade-offs are well worth it — the image is geometrically accurate, even if slightly more prone to noise.

Technical specifications of the AG5715MZT

Sensor: 2 Megapixel (1920×1080) global shutter CMOS. 16:9 aspect ratio (widescreen).

Frame rate: 1–20 fps. Lower than a standard Dino-Lite (30 fps) because global shutter requires more processing time per frame. 20 fps is still fully adequate for most motion analysis applications.

Software trigger: The frame rate can be adjusted for specific motion analysis tasks. When analyzing periodic movements (e.g., a 300 rpm fan = 5 rev/sec), the fps can be set to an integer divisor of the periodic frequency.

External trigger — for automation

The AG5715MZT features an external TTL trigger input. This enables:

Production line integration: When a component passes an optical sensor on the conveyor belt, the trigger signal is fired. The instrument captures ONE image at the exact moment the component is within the microscope’s field of view.

Frequency synchronization: When the inspected object rotates (e.g., a gear), the trigger signal can be synced to a rotary encoder. An image is captured at the exact same angle per revolution — providing a SINGLE STATIONARY image of the spinning gear.

Multi-camera sync: Multiple Dino-Lite Global Shutter instruments can be synchronized to capture stereoscopic images simultaneously.

Strobe output — for LED flash synchronization

The AG5715MZT can trigger an EXTERNAL STROBE LED via its strobe output. Combined with an external trigger:

  1. An external sensor triggers image capture.
  2. The AG5715MZT signals the strobe output.
  3. The external LED flash illuminates for microseconds to milliseconds.
  4. The sensor is exposed DURING the flash duration.

The result: the exposure time is EFFECTIVELY equal to the flash duration (100 μs) — significantly shorter than the sensor’s own 1–2 ms mechanical minimum exposure time. This allows OBJECTS MOVING AT VERY HIGH SPEEDS (e.g., a 6,000 rpm motor shaft with a 100 m/s peripheral speed) to be frozen sharply.

This is fundamentally the same principle as classic stroboscopic photography (as described in previous articles on the AM3713TB and Extech 461825).

Built-in LED flash mode

In addition to supporting an external strobe, the AG5715MZT features a BUILT-IN LED FLASH MODE. Standard Dino-Lite models feature continuous LED illumination. The AG5715MZT can be switched to a PULSED mode where the LEDs flash in sync with the sensor shutter.

Advantages:

  • Shorter effective exposure time.
  • Reduced motion blur and distortion.
  • Increased peak illumination (LEDs can be driven harder for short bursts than in continuous mode).

Trade-off: power consumption and LED lifespan — pulsed operation reduces the long-term LED lifespan by 30–50% over time.

Extended Dynamic Range (EDR)

Standard sensors feature a limited dynamic range: the difference between the brightest and darkest pixel that can be captured without clipping highlights or losing shadow detail in noise (typically 8–10 stops).

The AG5715MZT includes an EDR feature: multiple exposures at different shutter speeds are combined into a single image covering the FULL dynamic range (12–14 stops).

In microscopy, this is particularly valuable for:

  • Shiny metal surfaces adjacent to matte plastic surfaces (extreme contrast within the same field of view).
  • Electronics with bright LED indicators alongside shaded components.
  • High-glare reflections on specular materials.

Adjustable polarizing filter

Built-in polarizing filter (as described in the previous SL-ZW1 article) with an ADJUSTABLE angle for optimal cross-polarization. Works with the Dino-Lite built-in polarizer AND with the SL-ZW1 external polarized light source.

Applications where global shutter is critical

Rotational inspection — motors and machinery: Spinning shafts, gears, fan blades. A standard Dino-Lite produces unusable, blurred images; a global shutter provides sharp images with trigger synchronization.

Production line QC: Components passing on conveyor belts at 0.5–3 m/s. Trigger-synchronized image capture captures each component in its dedicated reference position.

Fluid flow analysis: Inkjet printer droplets, fuel injector spray patterns, microfluidic channel flows. Transient movements (100–500 μs) are frozen crisply.

Ballistics analysis: Bullet exit from a barrel, projectile penetration through materials. External trigger + strobe output enables microsecond capture.

Vibration analysis: Mechanical vibrations in the 100–500 Hz range. Multiple trigger-captured images enable frequency-domain analysis of motion patterns.

Sports and biomechanics research: Microscopic movements in cell cultures, soft tissue vibrations, fluid flow in biological systems.

Aerodynamics and wind tunnels: Smoke streamlines around small scale models.

Electronics diagnostics — high-speed transients: Visualization of micro-relay mechanisms and rapid mechanical switches.

High-speed video research: Combined with external camera triggering for stereoscopic high-speed recording.

Choosing between rolling and global shutter

Choose rolling shutter (standard Dino-Lite) when:

  • The object is STATIONARY during inspection.
  • Overall image quality takes precedence over motion accuracy.
  • Budget is a primary consideration.
  • Working in low-light environments (rolling shutter provides higher light sensitivity).

Choose global shutter (AG5715MZT) when:

  • The object MOVES during inspection.
  • Trigger synchronization with an external signal is required.
  • Motion analysis or multi-frame motion tracking is necessary.
  • Precision measurement of fast-moving parts is critical.

Robust metal housing

Anodized aluminum housing provides:

  • EMI shielding (crucial in production environments surrounded by electronic machinery).
  • Thermal stability (aluminum dissipates LED heat far better than plastic).
  • Mechanical durability (engineered for industrial workshop environments).

Specifications

  • Model: Dino-Lite AG5715MZT EDGE Global Shutter.
  • Sensor: 2 MP CMOS with global shutter.
  • Resolution: 1920×1080 (16:9).
  • Frame rate: 1–20 fps (software adjustable).
  • External trigger: TTL input.
  • Strobe output: TTL for external LED strobe.
  • Built-in LED flash mode.
  • Adjustable polarizing filter.
  • EDR (Extended Dynamic Range).
  • Automatic Magnification Reading (AMR).
  • Housing: Anodized aluminum.
  • Interface: USB.
  • Software: DinoCapture (included).

Package overview and value

Dino-Lite AG5715MZT EDGE Global Shutter, 2 MP CMOS sensor with simultaneous pixel exposure (eliminates motion distortion), 1–20 fps adjustable frame rate, external TTL trigger input for automation, strobe output for external LED flash, built-in LED flash mode, adjustable polarizing filter, EDR for extended dynamic range, Automatic Magnification Reading (AMR), anodized aluminum housing. 14 289 kr.

The go-to instrument for workshop and industrial applications involving MOVING objects — rotational inspection of motors and machinery, production line QC on running conveyor belts, fluid dynamics analysis, ballistics research, and biomechanical studies. The premium over a standard rolling shutter Dino-Lite is clearly justified whenever moving parts are involved — a rolling shutter would simply deliver unusable, distorted images.

Learn more: Dino-Lite AG5715MZT Global Shutter in the shop →

More news

All news