Published 16 November 2026 at 08:41
Most people who have tried to photograph a small part on a conveyor belt or a vibrating feeder will recognize the result. The edge of the component is slanted, the corners look as if they have been pulled to one side, and the dimension you are trying to read off does not match reality. The cause is usually the sensor, not the microscope. A standard rolling shutter reads out the image row by row, and if the object moves in the meantime, the image becomes distorted.
What the product is
The Dino-Lite AG5715MZTL is a digital microscope with a global shutter. All pixels are exposed at the same time, which eliminates motion distortion. The sensor has 2.0 megapixels in 16:9 format up to 1920 x 1080, and the magnification ranges from 10x to 140x. The optics have a long working distance, so there is room between the object and the microscope. The housing is made of anodized aluminum with EMI shielding.
What problems it solves
In addition to the distortion-free image, there is an external trigger input and a strobe output. This means the image can be captured at exactly the moment a sensor or PLC gives a signal, and an external strobe light can be synchronized with the shutter. The LED flash mode further reduces motion blur. An adjustable polarizing filter removes reflections from shiny metal surfaces, and EDR helps when details lie in both dark and bright areas of the same image. The software trigger provides 1 to 20 images per second for time-lapse studies.
How it is used
In electronics production, the microscope can be mounted above a conveyor and capture an image of each component or solder joint as the board passes a sensor. The long working distance means it does not get in the way of feeding or tooling.
In the manufacturing industry, this applies to small turned or stamped parts fed past on a vibrating feeder. With trigger and strobe, you get a sharp image of burrs, edge damage or surface defects without stopping the flow, and the polarizer reduces reflections from shiny metal.
In the quality laboratory, it is useful for documenting moving processes, for example a spring under load or a vibrating specimen. Automatic magnification reading (AMR) stores the magnification together with the image, so measurements in the software become traceable and repeatable.
Why it pays off
Manual spot checks require the line to stop or parts to be pulled out. That costs time, and the result depends on who is looking. With a triggered, distortion-free image, inspection can take place at the pace of production and be saved as documentation. Fewer incorrect assessments of measurable details reduce both rework and complaints. Because the microscope can be connected to existing controls, you do not have to rebuild the entire inspection station.
If you are inspecting something that moves and the image has so far been the weak link, the sensor is what you should look at. See the Dino-Lite EDGE Global Shutter at optiska.se and compare the specifications with your inspection setup.