Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspace

Standard magnifiers are corrected in the center, but the scale extends to the edge

Published August 28, 2026 at 04:27

In the description of this magnifier, there is a sentence that says more about optics than most data sheets do: conventional magnifying loupes are corrected only in the center of the image.

This is not a criticism, but rather a description of how a loupe is typically designed. You ensure that the center is sharp and leave the edges to fend for themselves, because someone who is merely looking will move the area of interest to the center anyway. But someone who is measuring cannot do that — a scale runs across the entire field of view, and the feature you need to measure ends up wherever it happens to be.

Peak Lupe 1990-4 anastigmatisk maetlupp 4x

What it is

An anastigmatic measuring loupe with 4x magnification.

  • Optical system consisting of two groups with three elements each
  • Corrected across the entire field of view, not just in the center
  • Measuring range of 60 mm, interchangeable reticles mounted in a plastic ring
  • Effective pupil located 25 mm below the top surface of the lens
  • Anti-reflective coated lenses

Astigmatism, and why it specifically affects the edges

An off-axis point does not image as a point. A simple lens focuses the two orientations — radial and tangential — at different distances, causing the point to appear as a short line. If you focus for one plane, the line points in one direction; if you refocus, it points in the other, and there is simply no setting where the point remains a true point.

On a printed surface, this appears as text smearing in one direction near the edge. On a measuring reticle, the effect is even worse: a graduation mark thickens or splits, leaving you uncertain of its exact position. The error is small, but it sits precisely where the measurement needs to be read.

Anastigmatic means that both orientations are brought to the same focus, allowing the edge to perform just like the center. This requires multiple lens elements that correct for one another — in this case, six elements in two groups, effectively bringing camera lens design into a loupe. It is also the straightforward reason behind its price.

The third aberration

Now the triangle is complete. An achromatic lens corrects chromatic aberration, preventing colored fringes along edges. A distortion-free lens corrects geometric errors, ensuring straight lines remain straight and the scale remains accurate everywhere. An anastigmatic lens corrects off-axis sharpness errors.

For a measuring loupe, all three serve the exact same purpose: ensuring the field of view is uniform all the way to the edge. A loupe that is only sharp in the center effectively has a much smaller usable field of view than it appears to have.

The pupil position is a usability detail worth noting

The effective pupil is positioned 25 mm below the top surface of the lens. The result is that you can survey the entire 60 mm wide field simply by moving your eye — not your head.

This sounds like a minor detail until you have been measuring for a while. Moving your head alters the viewing angle, introducing parallax error into the reading and making it easy to lose your place. Being able to simply sweep your gaze allows you to maintain both position and alignment.

The reticles are also interchangeable, enclosed in a plastic ring. Different tasks require different graduations — and the reticle is also the component subject to scratches and wear, making it practical to replace just the scale rather than the entire instrument.

Three typical use cases

  • Print and graphics: inspection of artwork, prints, and slides.
  • Film: backlit materials such as X-ray film.
  • Linear measurement: dimensions and distances up to 60 mm in a single view.

Why it pays off

A wide field of view is the entire point of a low-magnification loupe: you want to see the full context and measure across a span without moving the instrument. However, a field of view is only as large as the portion of it you can actually trust.

A loupe corrected right to the edge does not merely offer superior optics — it effectively provides a larger measuring tool, because the entire surface is usable. It is the same fundamental difference as that between an instrument’s nominal range and the range over which its stated accuracy actually applies.

Learn more about the Peak Lupe 1990-4 anastigmatic measuring loupe →

More news

All news