Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Glossy Surfaces and Incorrect Magnification: How to Get Reliable Measurements Under the MicroscopeShiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Glossy Surfaces and Incorrect Magnification: How to Get Reliable Measurements Under the MicroscopeShiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring room

Precision Rule with Two 10× Loupes 212 mm: When ±0.02 mm Accuracy over 200 mm Beats the Digital Caliper’s 0.03 mm for Point-to-Point Measurement

Published July 6, 2026 at 19:14

Precision measurement of distances between points (as opposed to distances between surfaces) is a classic metrology challenge that mechanical calipers cannot solve. Caliper jaws require a physical surface to reference against — but measuring the ”distance between scratch mark A and scratch mark B on a flat surface” offers no raised reference surfaces for the jaws to contact. This requires an entirely different measurement principle: a reference scale placed over the surface and two optical sighting instruments positioned precisely over each respective point. A precision measuring scale with magnifiers is the classic instrument for this type of measurement.

What the Peak RL-212-2 is

The Precision steel scale with 212 mm measuring length and two magnifiers (RL-212-2) is a metrology instrument from German manufacturer Peak Optics, featuring a laser-engraved stainless steel scale equipped with two separate sliding 10× magnifiers. The instrument:

  • Features a 212 mm measuring length, divided into 0.1 mm graduations.
  • Has two separate 10× magnifiers that slide along the scale’s guide rail.
  • Offers ±0.02 mm accuracy over the entire measuring length.
  • Is manufactured from stainless steel (grade 1.4301).
  • Features laser-engraved scales and numerals for high readability and wear resistance.
  • Is supplied in a protective case.
  • Can be complemented with a DAkkS calibration certificate.

Basic specifications:

  • Measuring length: 212 mm
  • Graduation: 0.1 mm
  • Accuracy: ±0.02 mm (at 20 °C)
  • Magnifiers: 2 pcs, 10× magnification
  • Minimum distance between magnifiers: ~32 mm center-to-center
  • Material: Stainless steel 1.4301
  • Total metal body length: 262 mm (scale protrusion +50 mm)
  • Engraving: Laser (lasts for decades)
  • Thermal expansion coefficient: 0.010 mm/m/°C (standard stainless steel)
  • Calibration certificate: Available as an accessory (factory certificate or DAkkS)

Peak RL-212-2 precision scale 212 mm with two 10× magnifiers

Why two magnifiers instead of one

A single sliding magnifier works for measuring distances from the zero point of the scale to a given location: align the end of the scale with point A, slide the magnifier to point B, and read the value. This approach has two limitations:

End-reference issue: The end of the scale is the physical origin of the graduation. Positioning it precisely at point A is difficult — there is no magnification over point A, only over the magnifier positioned at B.

Asymmetry issue: If the scale is bent or has microscopic twist, the zero point is no longer a reliable reference.

Using two magnifiers solves both issues: magnifier 1 is placed over point A, magnifier 2 is placed over point B, both values are read, and the difference between them is the measured distance. The advantages:

  • Both ends of the measurement feature magnification — ensuring identical accuracy at both points.
  • The end of the scale is never used as a reference.
  • If the scale shifts during measurement, the operator can see whether both magnifiers move (indicating the scale is slipping) or only one moves (which represents the actual adjustment being made).
  • Sub-millimeter point identification is clear and reliable with 10× magnification directly over the measurement point.

How 0.1 mm graduations yield 0.02 mm accuracy

An operator reading a scale with 0.1 mm graduations can interpolate between graduation lines to ~1/10 of the division — i.e., ~0.01 mm. Under 10× magnification, the graduation line appears ~1 mm wide in the field of view, making an interpolation error of just 0.01 mm practically achievable.

The ±0.02 mm accuracy specification accounts for:

  • The scale’s own manufacturing tolerance (laser engraving is ±5 μm).
  • Thermal expansion deviations from the calibration temperature.
  • Operator reading error using the 10× magnifier.
  • Microscopic scale deflection or twisting.

At 20 °C and with careful handling, the actual accuracy can be even better than ±0.02 mm — but the manufacturer specifies this conservative figure as consistently achievable in practice.

Where precision scales with magnifiers make a real difference

Defect documentation in the glass and plastics industries: Measuring crack lengths and distances between stress points on products evaluated for return claims or warranty inspections.

Crack analysis in materials testing: Metallurgical samples exhibiting crack patterns; the spacing between cracks is critical for fatigue analysis.

PCB measurement: Hole-center to hole-center dimensions on printed circuit boards. Digital calipers perform poorly here because the jaws cannot seat inside holes in a controlled manner.

Optical calibration standards: Verifying the distance between fiducial markers on calibration targets for optical measuring systems (cameras, CMMs, microscopes).

Tool wear documentation: Measuring the distance between wear tracks on cutting tools to quantify wear rates.

Graphic arts and printing industry: Registration marks and color-to-color distances on printed sheets. Placed directly onto the printed sheet.

Calibration laboratories: Certification measurements of production tooling where point-to-point measurement is required instead of surface-to-surface.

Stamp and numismatic authentication: Detailed measurement of print features or coin designs for authenticity verification.

Engineering measurements on technical drawings: Distance measurements directly on architectural or technical drawings (paper or Mylar) using the scale.

Art conservation: Documenting damage, craquelure, or alterations on paintings and historical artifacts.

Thermal and material stability

Calibration at 20 °C is the ISO standard. The thermal expansion coefficient for stainless steel is ~0.010 mm per meter per °C. On a 212 mm scale, this translates to:

  • At 25 °C (ambient room temperature 5 °C higher): 212 × 0.010 × 5 / 1000 = 0.011 mm expansion.
  • At 10 °C (cold workshop environment): 212 × 0.010 × -10 / 1000 = -0.021 mm.

This falls within the overall tolerance band at normal workshop temperatures (15–25 °C), but becomes noticeable in colder or warmer environments. Calibration laboratories use climate-controlled rooms at 20 ± 1 °C to eliminate this variable entirely.

What you get for the investment

Peak Optics RL-212-2 precision steel scale, 212 mm measuring length, laser-engraved 0.1 mm graduations, ±0.02 mm accuracy at 20 °C, 1.4301 stainless steel, two separate sliding 10× magnifiers with a minimum center-to-center distance of 32 mm, protective transport case, compatible with DAkkS calibration certificates available as an option.

4,029 SEK is the instrument investment. Compared to a 200 mm digital caliper (500–1,500 SEK, ±0.03 mm accuracy, yet unsuitable for point-to-point surface measurements), this precision scale provides superior accuracy along with an entirely different measurement principle essential for point-to-point tasks. Compared to an optical measuring microscope (25,000–100,000 SEK with motorized stages and digital readouts), this precision scale offers a portable, handheld solution for rapid measurements without requiring a stationary benchtop setup.

Learn more: Precision scale RL-212-2 in the shop →

More news

All news