Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Glossy Surfaces and Incorrect Magnification: How to Get Reliable Measurements Under the MicroscopeShiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Glossy Surfaces and Incorrect Magnification: How to Get Reliable Measurements Under the MicroscopeShiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring room

Peak Lupe 2001 Pen Microscope 75x with 12.4 mm-Diameter Body: When 75x Optical Magnification in Pen Format Reaches into Boreholes and Confined Spaces Where Stand Microscopes Are Physically Ruled Out

Published July 13, 2026 at 13:22

Pen microscopes are an optical instrument category that bridges the gap between loupes and microscopes: offering more magnification than a handheld loupe (typically 6–30x), less than a benchtop microscope (typically 100–1000x), and far greater portability than both. The Peak Lupe 2001 series pushes the concept to its limit: 75x magnification in a body measuring just 12.4 mm in diameter — slimmer than many pens.

This enables inspection applications that no benchtop microscope can perform: looking down into boreholes, channels, cracks, recessed engravings, cooling slots, ventilation ducts, and other geometrically constrained spaces.

75x Magnification in Pen Format: The Optical Challenge

Magnification formula for a simple microscope:

M = (250 mm / f_objective) × (250 mm / f_eyepiece)

Achieving 75x magnification requires a very short focal length in the objective lens. The Peak 2001 series achieves this with a double-achromatic design, where two separate objective elements correct for chromatic aberration (red and blue wavelengths refract differently in simple lenses, causing color fringing in the image).

The challenge with a short focal length: the field of view shrinks. At 75x, the field of view is only 1.09 mm — an image circle smaller than a 12-point letter. Navigating to the target area requires preliminary inspection at lower magnification and a steady hand or mount.

Field of view comparison across the model series:

  • 15x version: 5.4 mm field of view.
  • 25x: 3.3 mm.
  • 50x: 1.7 mm.
  • 75x: 1.09 mm.
  • 100x: 0.84 mm.

The rule of thumb: the higher the magnification, the smaller the field of view, and the more pre-inspection is required to locate the measurement area. For open surface characterization, 25–50x is optimal. For verifying pre-located defects (e.g., micro-cracks already detected with simpler instruments), 75x or 100x is the right choice.

Mirror Image in the Eyepiece

An important detail for the user: the Peak 2001 series displays an INVERTED (MIRROR) IMAGE in the eyepiece. This is a consequence of the optical design — by omitting a prism or additional lens elements to erect the image, Peak keeps the instrument as compact as possible.

Practical implications:

  • When reading text: the text appears mirrored. With a little practice, it can be read intuitively, but it can be disorienting at first.
  • When measuring: lateral movements are reversed — move the pen to the right, and the image moves to the left.
  • When documenting via photo (using a smartphone adapter): the photo is mirrored and must be flipped in post-processing.

This compromise is widely accepted for applications where the pen format is critical. If the mirror-image effect is unacceptable, Peak offers other models (such as the Peak 2044 series) featuring an image-erecting prism at a higher price point and in a larger format.

High-Transmission Lenses — No Illumination Required

Standard microscopes above 50x magnification typically require external illumination (ambient light cannot adequately penetrate the objective’s narrow field of view). The Peak 2001 series features specially designed lenses with high light transmission that work using only ambient daylight or standard workshop lighting.

The physics behind it: the numerical aperture (NA) of the lens dictates its light-gathering capability. Peak’s design optimizes the NA rather than focusing solely on maximum magnification with a minimal aperture. The trade-off is a slightly softer image contrast, but the clear advantage is that the instrument functions without any external LED accessories.

Focusing via Acrylic Base

Focusing is achieved by threading the pen body into an acrylic base placed directly on the workpiece. The acrylic base is transparent, allowing ambient light to enter from the sides. The screw mechanism provides a focusing precision of approximately 0.1 mm of mechanical travel per 30° turn.

Downside: the focal range is fixed (determined by the height of the acrylic base, typically 30–40 mm above the measurement surface). Depth estimation therefore requires:

  • Focusing on the upper surface reference point.
  • Marking the focus position on the screw thread.
  • Focusing on the bottom reference point.
  • Counting the screw revolutions between the positions.
  • Multiplying by the thread pitch (typically 0.5–1.0 mm/rev) to estimate depth.

Precision: ±0.05–0.1 mm — suitable for many verification tasks, but insufficient for laboratory-grade precision measurements, where a Peak 2034-CIL series depth-measuring microscope would be the appropriate tool.

Applications

Borehole inspection: Accessing Ø15–25 mm boreholes to verify thread profile, surface finish, or check for residual swarf at the bottom of the hole.

Watchmaking: Inspecting gear trains in watch movements — the pen format easily reaches between mainsprings and balance wheels.

Electronics service: PCB inspection beneath components, inside via holes, and between densely packed SMD components.

Dentistry: Verification inspection of crown and bridge work prior to cementation. The pen format suits the restricted access of the oral cavity.

Numismatics and philately: Detailed inspection of coin and stamp features where a benchtop microscope is too cumbersome.

Fiber optics: Inspecting fiber end-faces for polishing defects (microscopic scratches that degrade signal transmission).

Shooting sports and locksmithing: Verifying mechanical surfaces inside pistol mechanisms and lock cylinders, where the instrument must be inserted directly into barrels or keyways.

Restoration of vintage instruments: Inspection in tight spaces within piano wrest planks, organ pipes, and mechanical calculating machines.

Series Options — How to Choose the Right Magnification

Peak 2001 series: 15x, 25x, 50x, 75x, 100x.

  • 15x: Ideal for general overview inspection. The 5.4 mm field of view is sufficient to quickly locate areas of interest.
  • 25x: Excellent balance between field of view and resolution. Popular for electronics and watchmaking.
  • 50x: The lower threshold for micro-details. Sufficient for most crack and defect verification tasks.
  • 75x: For details in the 10–30 μm range — surface finishing on fiber optics, grain size in materials science.
  • 100x: The absolute limit for the pen format. The field of view is restricted to 0.84 mm — more of a specialized tool than a general inspection device.

Specifications

  • Magnification: 75x (this model — 82-2001-75X).
  • Field of view at 75x: 1.09 mm.
  • Optical design: Double-achromatic objective, inverted (mirror) image.
  • Illumination: Daylight / ambient room lighting (no external LED required).
  • Focusing: Threaded acrylic base.
  • Dimensions: 124 × 12.4 mm.
  • Weight: 12 grams.
  • Synthetic leather case included.

Value for Money

Peak Lupe 2001 pen microscope, 75x version (82-2001-75X), double-achromatic optical design, acrylic base focusing, 1.09 mm field of view, no external illumination required, mirror image in the eyepiece, 124 × 12.4 mm pen format, 12 grams weight, synthetic leather case included. 1 047 kr.

The standard tool for high-magnification inspection in geometrically tight spaces — boreholes, recessed channels, watch movements, dentistry, fiber optics, and other applications where benchtop microscopes are physically impractical. The premium over a standard 30–40x loupe (500–800 kr) is fully justified when 75x magnification is critical for resolving micro-cracks, grain structures, or surface defects below 20 μm.

Learn more: Peak Lupe 2001 pen microscope 75x in our shop →

More news

All news