Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The crack is 0.3 mm today: get a measured value instead of a gut feelingGlare and uneven surfaces make visual inspection unreliable: how to get sharp, measurable imagesThe Glare on the Metal Surface Hides the Scratch: How to See Through Reflections with Polarized LightGlossy surfaces hide the flaw: how to eliminate reflections when inspecting and measuring under a microscopeHow to Get a Sharp Image of Details Moving Too Fast for the EyeGlossy Surfaces and Incorrect Magnification: How to Get Reliable Measurements Under the MicroscopeShiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The crack is 0.3 mm today: get a measured value instead of a gut feelingGlare and uneven surfaces make visual inspection unreliable: how to get sharp, measurable imagesThe Glare on the Metal Surface Hides the Scratch: How to See Through Reflections with Polarized LightGlossy surfaces hide the flaw: how to eliminate reflections when inspecting and measuring under a microscopeHow to Get a Sharp Image of Details Moving Too Fast for the EyeGlossy Surfaces and Incorrect Magnification: How to Get Reliable Measurements Under the MicroscopeShiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of Sight

The crack is 0.3 mm today: get a measured value instead of a gut feeling

Published 22 November 2026 at 02:28

Someone points at a crack in a concrete wall or at a milling cutter that looks a bit worn. The question is the same in both cases: is this new, and has it gotten worse since last time? Without a measured value, the answer is an opinion, and two people usually have different opinions. With a ruler and a visual estimate, it is impossible to judge anything below half a millimeter.

Spricklupp, RL-6. Förstoring 6x

What a crack-measuring magnifier is

The RL-6 is a robust all-metal magnifier with 6x magnification and an aplanatic lens, that is, a lens without distortion toward the edge. Beneath the lens sits a stainless steel scale with etched graduation in 0.1 mm steps and a line width of 0.02 mm. The scale is angled at 45 degrees, which lets light in and reduces reflections so that it can be read even on shiny or uneven surfaces. The lens is focused by adjusting its height. The field of view is 30 mm and the working distance is 20 mm. The magnifier weighs 40 grams and fits in your pocket with the supplied plastic case.

The problem it solves

The scale is etched in steel and not printed on glass. It therefore withstands a workshop environment and is not as easily scratched as a glass scale. You read the crack width or wear mark directly against the object, without a computer, camera or power source. If you want extra light, LED illumination is available as an option.

Three situations where it is used

Manufacturing industry. The magnifier is particularly well suited for inspecting the cutting edges of drills and milling cutters. You can see chipping and wear width before the tool starts to produce a poorer surface finish or dimensional deviations. With a reading in tenths of a millimeter, you can also set a limit value for when the tool should be replaced.

Construction and property maintenance. Technicians use it to measure the width of cracks in concrete. Measure, note the date and position, and measure again on the next round. If the width changes over time, you have documentation. If it does not change, you can rule out the concern.

Quality control. On castings, welds and machined surfaces, 6x is often enough to assess a scratch, a hairline fracture or edge damage. You get a dimension to write in the deviation report instead of the word "visible".

Why it pays off

The cost is small compared with what missed wear costs. A milled workpiece that is scrapped because of a dull edge often costs more than the entire magnifier. On the maintenance side, you avoid calling in a consultant or more expensive equipment for an initial assessment. The simple construction also means it is always ready and does not need to be recalibrated after a trip in the toolbox. The scale is available as a spare part if it should be damaged.

If you need to build measurement into your routine, whether with the operator, the maintenance technician or the inspector, the RL-6 is a way to do it without an investment decision.

See the data and order here: Spricklupp RL-6.

Read more

More news

All news