Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspace
Item number 82-M-820-S

Monocular and Magnifier with Near Focus, Specwell M-820-S. Magnification 25x

4.288 SEK

In stock
Request a quote 82-M-820-S

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: ,

Other models in the series 8

Description

Specwell M-820-S Monocular loupe / viewer with extra near-focus lens and reticle scale with graduations of 0.1, 0.05, and 0.2 mm. Can be used either as a loupe or as a viewer. Popular for industrial applications in quality control and inspection.

When using this product as a viewer, objects can be seen sharply at a minimum working distance of 300 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 9 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is right-side up. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Magnification 8x (monocular)
25x (as loupe)
Focusable Yes
Scale Yes
Top increment

0.1 and 0.05 mm

Bottom increment

0.2 mm

Working distance

5 mm

Working distance (min.) 300 mm (loupe)
70 mm (loupe)
Field of view, loupe Distance 1000 meters = 113 meters
Distance 300 mm = 25 mm
Field of view with close-up lens 9 mm (loupe, LS)
Size 91 x 32 mm (loupe)
172 x 45 mm (loupe)
Weight 76 grams (monocular)
110 grams (loupe)
Leather case Included
Display Upright image
Lens aperture 20 mm
Field angle 6.5 °
Relative brightness 6.2
Exit pupil diameter 2.5 mm

 

Additional information
Product Type

Magnification range

Specification

Specwell M-820-S Monocular loupe / viewer with extra near-focus lens and reticle scale with graduations of 0.1, 0.05, and 0.2 mm. Can be used either as a loupe or as a viewer. Popular for industrial applications in quality control and inspection.

When using this product as a viewer, objects can be seen sharply at a minimum working distance of 300 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 9 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is right-side up. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Magnification 8x (monocular)
25x (as loupe)
Focusable Yes
Scale Yes
Top increment

0.1 and 0.05 mm

Bottom increment

0.2 mm

Working distance

5 mm

Working distance (min.) 300 mm (loupe)
70 mm (loupe)
Field of view, loupe Distance 1000 meters = 113 meters
Distance 300 mm = 25 mm
Field of view with close-up lens 9 mm (loupe, LS)
Size 91 x 32 mm (loupe)
172 x 45 mm (loupe)
Weight 76 grams (monocular)
110 grams (loupe)
Leather case Included
Display Upright image
Lens aperture 20 mm
Field angle 6.5 °
Relative brightness 6.2
Exit pupil diameter 2.5 mm

 

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *