Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny Surfaces and Tight Workspaces: How to Get a Measurable Image Without GlareMoving Parts Come Out Sharp When All Pixels Are Exposed at the Same TimeCrack width in tenths of a millimeter: why you measure instead of guessingWith 15 Centimeters of Clearance to the Circuit Board, There Is Room for Both the Soldering Iron and Your Line of SightShiny metal surfaces can be measured once the reflections disappear and the entire surface is in focusReflections on the metal surface hide the scratch: how to see it with polarized light and a measurement functionInspect the solder joint on a screen right at the workstation, without a computer and without getting too closeAtt se in i röret i stället för att gissa: så sparar en inspektionskamera dagar av felsökningMeasure the scratch, edge or hole on site before the part is sent to the measuring roomMeasure under the microscope instead of next to it: get documentable measurements without losing your workspace
Item number 85-RL-212-1-LED

Precision steel ruler with 212 mm measuring length, one magnifier and LED

3.777 SEK

In stock

Request a quote 85-RL-212-1-LED

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Measuring larger distances with a magnifier is limited by the length of the scales and is only possible to a limited extent. For quick and easy determination of lengths and distances, RL precision steel measuring rulers are an ideal complement.

They are available in four lengths of 100 mm, 212 mm, 300 mm, and 400 mm, with one or two magnifiers (Crack magnifier RL-10 without scale) and are delivered in a carrying case. The magnifier moves on a guide rail mounted on the scale. When measuring length and distance, it must be ensured that the scale is placed parallel to the material to avoid measurement errors. Standard steel RL, with an accuracy of ± 0.02 mm. Test protocols are available for purchase as an accessory.

The four standard lengths of the precision steel measuring ruler are available with one or two magnifiers with 10x magnification. In addition, both versions are available as separate models with LED lighting.

Note that when using two magnifiers, the distance from center to center of the magnifiers is approximately 32 mm from the lowest readable value.

Factory calibration certificate (300 and 400 mm and 212 mm) or DAkkS (100). The delivery time is then extended by approximately two weeks.

For installation, we offer four metal standards according to order number RL-OA as a plain standard without magnifying glass or other superstructures.

Technical data for metal standards RL:

  • Measuring scale: Graduation = 0.1 mm, marked 0 10 20 … (mm)
  • Graduations and numbers for stainless steel are laser-engraved.
  • Length precision ± 0.02 mm over the entire measuring length (at 20 degrees Celsius)
  • Thermal expansion coefficient: 0% per =% RLF
  • Material = 1-4301
  • Scale not centered on average – centered on metal body
  • Length of metal body:
  • 100 mm = total length 150 mm (+ 0.2 mm)
  • 212 mm = total length 262 mm (+ 0.2 mm)
  • 300 mm = total length 350 mm (+ 0.2 mm)
  • 400 mm = total length 450 mm (+ 0.2 mm)
  • Width of metal body = 19.6 mm (DIN 7168 medium)
  • Thickness of metal body = 2.0 mm (DIN 7168 medium)
Specification

Measuring larger distances with a magnifier is limited by the length of the scales and is only possible to a limited extent. For quick and easy determination of lengths and distances, RL precision steel measuring rulers are an ideal complement.

They are available in four lengths of 100 mm, 212 mm, 300 mm, and 400 mm, with one or two magnifiers (Crack magnifier RL-10 without scale) and are delivered in a carrying case. The magnifier moves on a guide rail mounted on the scale. When measuring length and distance, it must be ensured that the scale is placed parallel to the material to avoid measurement errors. Standard steel RL, with an accuracy of ± 0.02 mm. Test protocols are available for purchase as an accessory.

The four standard lengths of the precision steel measuring ruler are available with one or two magnifiers with 10x magnification. In addition, both versions are available as separate models with LED lighting.

Note that when using two magnifiers, the distance from center to center of the magnifiers is approximately 32 mm from the lowest readable value.

Factory calibration certificate (300 and 400 mm and 212 mm) or DAkkS (100). The delivery time is then extended by approximately two weeks.

For installation, we offer four metal standards according to order number RL-OA as a plain standard without magnifying glass or other superstructures.

Technical data for metal standards RL:

  • Measuring scale: Graduation = 0.1 mm, marked 0 10 20 … (mm)
  • Graduations and numbers for stainless steel are laser-engraved.
  • Length precision ± 0.02 mm over the entire measuring length (at 20 degrees Celsius)
  • Thermal expansion coefficient: 0% per =% RLF
  • Material = 1-4301
  • Scale not centered on average – centered on metal body
  • Length of metal body:
  • 100 mm = total length 150 mm (+ 0.2 mm)
  • 212 mm = total length 262 mm (+ 0.2 mm)
  • 300 mm = total length 350 mm (+ 0.2 mm)
  • 400 mm = total length 450 mm (+ 0.2 mm)
  • Width of metal body = 19.6 mm (DIN 7168 medium)
  • Thickness of metal body = 2.0 mm (DIN 7168 medium)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *